Hitachi PH Instruction Manual page 117

3-49 ● Setting high-speed printing
Set to "Overall column setup" and then set to "3 lines" on the
4
"Print line setup" screen.
Print description
Column1 Column2
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
Print line
Overall column setup
setup type
1 line 2 lines 3 lines
Set "Character orientation" to "0: ABC" or "1: ABC" on the "Print
5
specifications" screen.
Print specifications
Character height [ 5 0 ] (0-99)
Character width [ 0 0 2 ] (0-199)
[ ] (0:
Character orientation 0
(Arrow: Printing direction)
Printing method 2 (1:single scan 2:
1 2 3 4
Press Next Display twice.
6
● The third page of "Print specifications" screen will appear.
Set "Ink drop use" to "01" on the "Print specifications" screen.
7
Print specifications
Target sensor timer [ 0 0 0 ] (1/10sec 0:none, 1-999)
Target sensor filter [ 1 ] (1:
Setup value [ 0 0 0 0] (msec 0-9999)
Ink drop use [ 0
1 2 3 4
Press Next Display .
8
● The 4th page of "Print specifications" screen will appear.
Status: Ready
Column3
Individual column setup
4 lines
Status: Ready
ABC 1: ABC 2: 3: )
→ ← ← →
Interlaced )
5 6 7 8 9 0
Status: Ready
time setup 2:until end of print)
1] (1/1~1/16 Enter denominator.)
5 6 7 8 9 0
Show
Shut
Manual
cursor
down
《 》
Cancel
OK
Show
Shut
Manual
cursor
down
Prev. Next
dis- dis-
paly paly
← →
Decre-
ment
Incre-
Back
ment
Shut
Show
Manual
cursor
down
Prev. Next
dis- dis-
paly paly
← →
Decre-
ment
Incre-
Back
ment