Hitachi PH Instruction Manual page 282

■Print line setup
This is a feature that defines the number of lines.
When the "overall column setup" method is cho-
sen, all the columns will be targeted. When the
"individual column setup" method is selected,
only the designated column will be targeted.
This feature is called up from the print descrip-
tion screen.
■ Print specifications
This is a feature that allows you to enter the char-
acter height, character width, print start delay, and
other printing-related setup data. It is to be called
up from the print description screen.
■Product speed matching
Based on the encoder signal that is proportional
to the print target transport speed, this feature
exercises print control so as to maintain a fixed
character width.
■Pulse rate division Factor
Definition of the ratio of encoder signal
referencing.
The value "1/12" means that one reception occurs
every 12 signals.
■Ready for printing
State in which the ink is being ejected with the
deflection voltage applied. In this state, prints can
be made upon receipt of the print target detection
signal.
■<Save> key
(1) While the print description screen is
displayed, this key is used to switch to the
save message screen.
(2) While the create user pattern function is used,
this key effects switching to the pattern save
screen.
■Saving
(1) Function for saving on-screen print data from
the print description screen.
(2) Function for saving an on-screen user pattern
from the create user pattern screen.
■<Select> key
(1) While the print description screen is
displayed, this key is used to open the select
message screen.
(2) While the user pattern creation function is
selected, this key is used to open the select
pattern screen.
(3) While print data listings are displayed, this
key is used to select print data to be
processed.
R
S
■Selection
(1) Function used to recall saved print data from
the print description screen.
(2) Function used to recall a saved user pattern
from the create user pattern screen.
■Service state
State in which the circulation control function is
being executed
■Set
Columns in which the line count, line spacing,
and character size arrangements are the same. Up
to four sets can be preselected for each print data.
■Shift code
This function is used to divide a day into multiple
work shifts and print a different code for each
work shift.
■Solution check
This check is performed to determine whether an
encountered fault persists or is cleared. When the
encountered fault permits a solution check, the
<Reset> key is displayed within a fault window.
■Starting process in progress
State in which the preparations for ink ejection
are being made. This state terminates the moment
the printer switches to the standby state.
■Standby state
State in which the ink is being ejected, no
deflection voltage is applied, the nozzle head
cover is installed, and the auto-phase is
established.
■Stopping process in progress
This state prevails between the instant at which
ink ejection is stopped and the instant at which
the printer goes into the inactive state.
■Stop process
This process is performed to stop an ink ejection
operation and switch to the inactive state.
■Stop state
State in which the ink is stopped.
■Speed compensation
Based on the encoder signal that is proportional
to the print target transport speed, this function
prevents the print start delay from varying.
■Substitution rules
Character string correspondence table that
defines the relationship
characters and their substitutes.
■Substitution rule setup
This is a feature that allows you to define the
substitution rules. Use this feature to enter
substitution characters into the correspondence
table. This feature is called up from the calendar
condition screen.
between calendar
● Terms and definitions 14-5