Hitachi PH Instruction Manual page 125

Operations for
modifying the setting
contents
(See Section 2.1.3,
Operations for
modifying the setting
contents. )
4-2 ● Managing the Operations
From the "Print description" screen, press Menu .
1
The maintenance selection menu then appears.
Auxiliary
Maintenace
function
Press Operation management .
2
The "Operation management" screen then opens.
Operation management
0
Operating time [
Ink alarm time [ 1 2 0 0 ] (hours;standard value:1200)
Cumulative op. time 0 0 0 1 0 0 (hours)
Print count [ 0 0 0 0 0 1 0 0 0 ] (prints)
Ink, makeup ink JP-K67, TH-TYPE A
Excitation V-ref.
Excitation frequency
1 2 3 4
Press Reset .
3
The operating time field then reads [0000] hours.
Operation management
Ink operating time [ 0 0 0 0 ] (hours)
Press Print count.
4
The cursor then moves to the print count field.
Press Reset .
5
The print count field then indicates a print count of [000000000].
Operation management
Ink operating time [ 0 0 0 0 ] (hours)
Ink alarm time [ 1 2 0 0 ] (hours;standard value:1200)
Cumulative op. time 0 0 0 1 0 0 (hours)
[ 0 0 0 0 0 0 0 0 0 ] (prints)
Print count
Press Apply .
6
Press OK .
7
The system then returns you to the "Print description" screen.
Keying procedures
Key
Selects a setting of 0 while the cursor is placed in the
Reset
ink operating time, ink alarm time, print count, or
cumulative operating time field.
Causes the setting in the current cursor position to
Recover
revert to the value prevailing before the change.
OK Returns you to the previous screen.
Operation Show fault Environment
management /Warning setup menu
Status: Ready
1 0 0 ] (hours)
10 (0~19)
68.9 (KHz)
5 6 7 8 9 0
Status: Ready
Status: Ready
Function
Menu
Show
Shut
Manual
cursor
down
Prev. Next
dis- dis-
paly paly
← →
Decre- Re-
Reset
cover
ment
Incre-
OK
ment
Shut
Apply Manual
down
N t
Shut
Apply Manual
down
Prev.
Next
dis-
dis-
paly
paly