Changing The Pin - Mitel MiVoice 5361 User Manual

Personalizing your phone

Changing the PIN

You want to change the PIN used to lock/unlock your phone (see chapter "Locking your
phone", page 50 and "Unlocking your phone", page 51).
The digit combination "0000" is set as default. You can select any 2 to 8-digit combination
for your new PIN.
If you have forgotten your PIN, your system administrator can reset it to the default set-
ting. Depending on the system settings the function may not be available.
Note:
Your PIN applies to all your phones.
Menu
Settings
General
PIN
<Old PIN>
<New PIN>
<New PIN>
76
Press Foxmenu, then Foxkey Menu.
Scroll to and press the
Settings
Scroll to and press the
General
Scroll to and press the
PIN
The display shows
➔
Enter the old PIN and confirm with the
The display shows
➔
Enter the new PIN and confirm with the
The display shows Confirm.
➔
Enter the new PIN a second time and confirm with the
The new PIN is stored.
➔
Notes:
• For each digit entered, the display shows an "*".
• You can also change the PIN with function code *47 (see User Guide
Function Codes on the
Foxkey.
Select
Foxkey.
Select
Foxkey.
Modify
Old PIN.
Ok
New PIN.
Ok
Mitel DocFinder).
Foxkey.
Foxkey.
Foxkey.
Ok
MiVoice 5361 / MiVoice 5361 IP
eud-1677/1.0 – R3.0 – 08.2015