Fujitsu PRIMERGY RX200 S4 User Manual page 54

Chapter 3 OS Installation
14
Perform the settings for the RAID management tool (ServerView RAID).
For the setting procedures, refer to the manuals in Array Controller Document & Tool CD.
• Settings of an array administrator account
The Windows user account is required when using ServerView RAID.
Create a group named "raid-adm", and an account with any name for an array administrator
within the group "raid-adm".
• Setting the HDD check scheduler
When using the SAS RAID Ctrl (MegaRAID SAS) and Onboard Software RAID (Embedded
MegaRAID SATA), change the settings for the HDD check scheduler according to the
operation that is required. It is set to 12:00 everyday as default.
• Configuration of Battery Recalibration Scheduler
When using the SAS RAID Ctrl (MegaRAID SAS) together with a battery backup unit, change
the settings of Battery Recalibration Scheduler according to the operation that is required. The
default setting is 11:00 on the first of every month.
15
Perform settings for ServerView.
Refer to "2.4 Checking after Installation" in "ServerView User's Guide" to perform the necessary
settings.
The server setup and OS installation have been completed.
Refer to "Chapter 4 Operations after OS Installation" ( p.71) and perform necessary procedures before
starting server operations.
54