Fujitsu PRIMERGY RX200 S4 User Manual page 35

3
Place the CD/DVD at the center of the tray.
While supporting the CD/DVD tray, push the tray until it clicks into position.
If the CD/DVD is placed improperly when the tray is pushed into the unit, the CD/DVD or the
drive may be damaged.
Be careful not to touch the lens of the CD/DVD drive.
When inserting CD/DVD, the CD/DVD access LED is turned on. After checking that the LED is
turned off, proceed with the next procedure.
4
Move the tray back.
Push the tray gently until it clicks into position.
Ejecting the CD/DVD
To eject the CD/DVD, press the CD/DVD eject button in the same way as steps 1 to 2 in "
the CD/DVD" ( P. 34)
Label side up
CD/DVD tray
CD/DVD tray
PRIMERGY RX200 S4 User's Guide
Inserting
35