Fujitsu PRIMERGY RX200 S4 User Manual page 133

4
Pull out the server until it locks.
5
Pushing the button (1), slide the top cover slowly to the rear side and lift it to
remove it from the server (2).
How to attach the top cover
To attach the top cover, reverse the removing procedure.
Lock
• Be careful not to pinch your fingers or clothes when pulling out the server or
pushing it back. That may cause injuries.
(2)
(1)
Button
• Before attaching the top cover, make sure no unnecessary parts or tools are
left inside the server.
• When turning on the server, make sure the top cover is closed.
PRIMERGY RX200 S4 User's Guide
Top cover
133