Chapter 6 Installing Internal Options
4
Remove the dummy unit.
1. Press the tab labeled "PUSH" at the back of the CD/DVD drive bay.
2. Remove the dummy unit.
5
Lift up the dummy unit and remove it from the CD/DVD drive chassis.
Dummy unit
6
Attach the internal DVD-ROM unit to the CD/DVD drive chassis.
Fit in the protrusions at the left side of the internal DVD-ROM unit, and screw on the right side.
Fit in the protrusions.
Internal DVD-ROM unit
162
(2)
Dummy unit
To remove an existing internal DVD-ROM unit, use the same procedure.
(1)
Press "Push".
[Front]