Installation Location Of Memory Modules - Fujitsu PRIMERGY RX200 S4 User Manual

6.4.1 Installation Location of Memory Modules

The memory modules installed in this server are composed of two Dual In-Line Memory Modules
(DIMM), the two DIMMs are configured as one pair.
Regarding this server's memory slots, a memory bank consists of slots "A and B" and "C and D".
Install memory modules in the memory slots on the baseboard.
[Rear]
[Front]
Installation order
Install the memory modules in ascending order of memory capacity from memory bank 1 – memory
bank 2 – memory bank 3 – memory bank 4 – memory bank 5 – memory bank 6. Each memory pair must
contain a pair of memory modules with the same capacity.
PRIMERGY RX200 S4 User's Guide
FBD1C
FBD2C
Memory Bank 2
FBD3C
FBD1D
Memory Bank 4
FBD2D
Memory Bank 6
FBD3D
FBD1A
FBD2A
Memory Bank 1
FBD3A
FBD1B
Memory Bank 3
FBD2B
Memory Bank 5
FBD3B
141