Fujitsu PRIMERGY RX200 S4 User Manual page 157

4
Connect the provided battery backup unit cable to the battery backup unit.
Connect the battery backup unit cable checking its direction.
Battery backup unit cable
Do not connect the cable using excessive force, the connector is weak.
5
Install the battery backup unit in the location where the stud beside the fan unit
is.
1. Remove the cables (SAS cable, LED cable, etc.).
Installation location
Remove the cables.
2. Set the battery part of the battery backup unit up, and align the screw holes (two
parts) with the stud locations to install.
[Front]
PRIMERGY RX200 S4 User's Guide
157