Fujitsu PRIMERGY RX200 S4 User Manual page 138

Chapter 6 Installing Internal Options
9
Install the heat sink.
Secure the heat sink with screws.
Tighten the screws little by little diagonally.
10
Reattach the fan duct.
11
Attach the top cover and push the server back into the rack.
"6.2 Attaching/Removing the Top Cover" (p.132)
12
Initialize the Extended System Configuration Data (ESCD).
Set [Reset Configuration Data] to [Yes] in the [Advanced] menu of the BIOS Setup Utility.
"7.2.5 Advanced Menu" (p.183)
13
Save the BIOS configuration data.
"4.3 Storing the System Configuration Information" (p.82)
How to remove the CPU
To remove the CPU, reverse the installation procedure.
138
Heat sink
Make sure that the four screws are securely tightened after the installation.