Fujitsu PRIMERGY RX200 S4 User Manual page 154

Chapter 6 Installing Internal Options
5
When installing a low-profile card in PCI slot 2, attach the extension slot cover
to the card with screw.
Use the screws attached to the extension slot cover.
(Skip this step when installing a full-height expansion card.)
Expansion card
(Low-profile)
Extension
slot cover
6
Insert the expansion card securely into the PCI slot.
When using PCI slot 1 or 2
When installing two cards in PCI slots 1 and 2, first install a card in PCI slot 1.
PCI slot 2
PCI slot 1
When using PCI slot 3
Install the SAS RAID Ctrl and then secure it with screws.
PCI slot 3
154
Expansion card
SAS RAID Ctrl