Fujitsu PRIMERGY RX200 S4 User Manual page 253

Connecting the server to a PC
Connect the server to a PC using an RS-232C cross cable.
Server (Rear)
PC (Rear)
Configuring the terminal software (PC)
Perform settings for the remote control function using terminal software on the PC.
Port configuration
Configure the port on the PC as follows:
table: Port Settings
Item
Bits per second
Data bits
Parity
Stop bits
Flow control
(Window example)
Serial port
Serial port
Contents
9600
8
Not applied
1
Not applied
PRIMERGY RX200 S4 User's Guide
RS-232C cross cable
253