Analog Output Signal Connections
Load
Load
Digital I/O Signal Connections
© National Instruments Corporation
The analog output signals are DAC0OUT, DAC1OUT, and AOGND.
DAC0OUT is the voltage output signal for analog output channel 0.
DAC1OUT is the voltage output signal for analog output channel 1.
AOGND is the ground reference signal for the analog output channels.
Figure 4-5 shows how to make analog output connections to the
611X E board.
DAC0OUT
+
VOUT 0
-
AOGND
-
VOUT 1
DAC1OUT
+
Figure 4-5. Analog Output Connections
The digital I/O signals are DIO<0..7> and DGND. DIO<0..7> are the
signals making up the DIO port, and DGND is the ground reference
signal for the DIO port. You can program all lines individually to be
inputs or outputs.
Channel 0
Channel 1
Analog Output Channels
611 X E Board
4-13
Chapter 4
Signal Connections
PCI-6110E/6111E User Manual