Table of Contents
Advertisement
Organization of This Manual
© National Instruments Corporation
This manual describes the electrical and mechanical aspects of the
611X E family of boards and contains information concerning their
operation and programming.
The 611X E family of boards includes:
•
PCI-6110E
•
PCI-6111E
Your 611X E board is a high-performance multifunction analog, digital,
and timing I/O board for PCI bus computers. Supported functions
include analog input, analog output, digital I/O, and timing I/O.
The
PCI-6110E/6111E User Manual
•
Chapter 1, Introduction,
you need to get started, describes the optional software and optional
equipment, and explains how to unpack your 611X E board.
•
Chapter 2, Installation and Configuration,
and configure your 611X E board.
•
Chapter 3, Hardware Overview,
hardware functions on your 611X E board.
•
Chapter 4, Signal Connections,
output signal connections to your 611X E board via the board I/O
connector.
•
Chapter 5, Calibration,
your 611X E board.
•
Appendix A, Specifications,
board.
•
Appendix B, Cable Connector Descriptions,
connectors on your 611X E board.
is organized as
describes your 611X E board, lists what
presents an overview of the
describes how to make input and
discusses the calibration procedures for
lists the specifications of your 611X E
xi
About
This
Manual
follows:
explains how to install
describes the cable
PCI-6110E/6111E User Manual
Advertisement
Table of Contents
