RTSI Triggers
© National Instruments Corporation
The seven RTSI trigger lines on the RTSI bus provide a very flexible
interconnection scheme for the 611X E board sharing the RTSI bus.
These bidirectional lines can drive any of eight timing signals onto the
RTSI bus and can receive any of these timing signals. This signal
connection scheme is shown in Figure 3-12.
Trigger
7
Clock
Figure 3-12. RTSI Bus Signal Connection
Refer to the
Timing Connections
Connections,
for a description of the signals shown in Figure 3-12.
switch
section of
3-13
Chapter 3
Hardware Overview
DAQ-STC
TRIG1
TRIG2
CONVERT*
UPDATE*
WFTRIG
GPCTR0_SOURCE
GPCTR0_GATE
GPCTR0_OUT
STARTSCAN
AIGATE
SISOURCE
UISOURCE
GPCTR1_SOURCE
GPCTR1_GATE
RTSI_OSC (20 MHz)
Chapter 4, Signal
PCI-6110E/6111E User Manual