Signal Connections; I/O Connector - National Instruments PCI-6110E/6111E User Manual

Signal Connections

I/O Connector

Caution:
!
© National Instruments Corporation
This chapter describes how to make input and output signal connections
to your 611X E board via the board I/O connector.
The I/O connector for the 611X E board has 68 pins that you can connect
to 68-pin accessories with the SH6868EP shielded cable.
Figure 4-1 shows the pin assignments for the 68-pin I/O connector on
the 611X E board. A signal description follows the connector pinouts.
Connections that exceed any of the maximum ratings of input or output
signals on the 611X E board can damage the 611X E board and the
computer. Maximum input ratings for each signal are given in the
Protection column of Table 4-2. National Instruments is
any damages resulting from such signal connections.
4-1
Chapter
4
liable for
NOT
PCI-6110E/6111E User Manual