Table of Contents
Advertisement
Chapter 3
Hardware Overview
Digital I/O
PCI-6110E/6111E User Manual
The 611X E board contains eight lines of digital I/O for general-purpose
use. You can individually software-configure each line for either input
or output. At system startup and reset, the digital I/O ports are all high
impedance.
The hardware up/down control for general-purpose counters 0 and 1 are
connected onboard to DIO6 and DIO7, respectively. Thus, you can use
DIO6 and DIO7 to control the general-purpose counters. The up/down
control signals are input only and do not affect the operation of the DIO
lines.
3-10
© National Instruments Corporation
Advertisement
Table of Contents
