Table of Contents
Advertisement
10
Sewing
10
Operating cycle
.01
● Carry out all steps in accordance with Chapter 9 Setting up.
● Place the material properly under the work clamp.
● Lower the work clamp and start the sewing cycle, see Chapter 7.02 Pedal.
10
Display options
.02
By pressing the button "Menu", the operator can switch between four different displays
while sewing
5
Program number
Speed
5
Program number
10
Sewing in the "Direct program selection" mode
.03
In this function, a seam pattern is selected. After selection, the speed and stitch length can
be altered, see Chapter 9.06.01 Selecting and changing the seam pattern.
10
Sewing in the "Program stations" mode
.04
Program stations can be selected, which have been reserved beforehand with a seam pat-
tern with relevant speed and size factors, see Chapter 11.01 Reserving program stations.
The machine must be installed, connected and set up as described in Chapter 8
Installation and Commissioning.
The machine must not be operated without the safety devices 1 to 5, see Chap-
ter 1.06 Danger warnings! Danger of injury!
.
2700
3,0mm
Stitch length
SET
5
Piece counter
5
Program number
Speed
5
Program number
X
Y
2700
100
100
Enlargement factor
SET
4955
Thread counter
Sewing
35
Advertisement
Table of Contents
