Input; Input Mode; Overview Of The Functions In Input Mode; Overview Of The Seam Program Input - Pfaff 1571 Instruction Manual

Input

11 Input
This chapter describes the input mode functions and how to enter seam programs.
11

Input mode

.01
When the machine is in its initial state, it is possible to enter the parameters and the
corresponding values directly in the control unit. The functions information, photo cell and
service can be called up.
11

Overview of the functions in input mode

.01.01
The input mode is called up by pressing the TE/Speed key twice.
2 x
A difference is made between parameter inputs and seam program inputs within the input
mode.
The PM key is used to enter into the seam program input after calling up the input mode.
11

Overview of the seam program input

.01.02
54
Call up seam program input
Select program number (corresponding +/- key)
Select input variants
Seam program input/ alteration
P
Confi rm selection (Enter)
Seam zone
Stitch length (feed motion) roller presser
Stitch length (feed motion) feed wheel
Scroll (only when the following functions are turned on)
Seam zone
Max. speed
Stitch number
Placed stitch position
Scroll (only when the following functions are turned on)
Seam zone
A
Start backtack forward stitches
B Start backtack backward stitches
Start backtack speed
Scroll (only when the following functions are turned on)
Seam zone
End backtack backward stitches
C
End backtack forward stitches
D
End backtack speed