11
Input
This chapter lists and describes the functions in the INPUT mode. This operational mode
includes the functions for program management, language selection, machine setting and
configuration, as well as for service and adjustment work. However this chapter does not
describe how to create a seam program. For information on how to create seam programs
please refer to the relevant instruction manual.
11
Summary of the functions in the INPUT mode
.01
INPUT mode
Program number selection
Sequence program number selection
Modify selected program
Create program
1 - DART 1
2 - DART 2
3 - PLEAT 1
4 - PLEAT 2
5 - BASTING STITCH
Create / modify free program
Enter seam parameters
1 - STARTTACK
2 - STITCH CONDENSING SEAM START
3 - ENDTACK
4 - STITCH CONDENSING SEAM END
5 - ANGLE SEAM END
6 - BASTING STITCH
Bobbin thread functions
1 - RESET STITCH COUNTER
2 - BOBBIN THREAD PRESELECT
Sewing head functions
1 - MAXIMUM SPEED
2 - SPEED TACK / REDUCTION
3 - SPEED BASTING STITCH
4 - INTERMITTENT STOP
5 - MAX. DEPTH CORRECTION
Input menu (see Chapter 11.02 Summary of the functions in the input menu)
1 - PROGRAM MANAGEMENT
2 - COUNTER
3 - SWITCH FUNCTIONS
4 - TIMES
5 - SERVICE (SEE CHAPTER 11.03 SUMMARY OF THE SERVICE FUNCTIONS)
Input
11 - 1