Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 User Manual page 174

Message on the LCD
Open&Close ScanCover
Reset Document
Paper Mismatch
Set XXX paper
Press Stop
Paper Mismatch
Roteta the paper
Press Stop
Please Call Service
XXX
Please Supply Paper
Please Wait
Polling In Use
Printer In Use
Protect Doc. Stored
Pull Blue Rod and
Close Front Cover
Replace Drum Soon
Replace Drum Unit
Printer Not Usable
Remove Bypass Paper
Open&CloseFrontCover
Scanner In Use
SecurityRx is Off
Select Paper Size
Sub-address In Use
Toner Almost Empty
Toner Empty
Printer Not Usable
Too Many Characters
Too Many Locations
12.16 M
AINTENANCE
Either your document was not inserted correctly, or the fax to which you are sending
can not handle the document's page length. Reset the page and try again.
In PC printing, the size of paper in the paper cassette is not match up the paper size
you specified by printer driver. Press
of paper and try printing again.
In PC printing, the direction of the Half-letter-sized paper on the bypass tray is wrong.
Half-letter is not available for PC printing. Set the Half-letter
The printer unit of your machine does not work. Contact your Muratec dealer.
The paper cassette or bypass tray is out of paper. Supply paper to the cassette and/or
the bypass tray.
Your machine's printer is either warming up or busy. Please wait until the machine is
finished printing and then re-try your command or operation.
You tried to store the regular polling document in your machine, where one already had
been stored. Wait for the machine to complete the regular polling operation or delete the
stored document.
The command you are trying to enter requires the use of the printer, which is currently
in use. Wait for the machine to finish printing.
A received document was in your machine's memory when you tried to turn off the
security reception passcode. Print the received document from your machine's memory,
then retry the desired operation.
The drum charge wire requires cleaning. Open the front cover, then pull the blue rod to
clean the charge wire.
Your drum will need to be replaced soon. Please contact your Muratec dealer to pur-
chase a new drum cartridge.
Your drum cartridge doesn't work. Your machine cannot print until it is replaced with a
new drum cartridge.
A paper is not properly fed into the machine through the bypass tray. Pull up the flap-
per release lever and pull the paper out of the machine. Then open and close the front
cover to reset the printer.
The command you are trying to enter requires the use of the scanner, which is currently
in use. Wait for the machine to complete the scan, then re-try the desired command.
You tried to turn the security reception on by pressing a soft key to which "security" is
assigned, but the security reception setting is not set to on.
To set the security reception setting to on, see page 9.3.
You tried to make a copy in the following conditions:
• Paper size selection is set to "Auto".
• The bypass tray has the paper other than Letter, Half-letter or Legal.
• Paper cassette runs out of paper.
Press /
PAPER SIZE NEXT DOC
You tried to enter a subaddress identical to one already used in another F-code box.
Enter a different subaddress.
Your machine is almost out of toner.
Please contact your Muretec dealer soon to purchase a new toner cartridge.
Your toner cartridge is empty. Replace the toner cartridge. Your machine cannot print
until it is replaced with a new toner cartridge.
You attempted to enter too many numbers or other characters in the current operation.
Press to delete the extra characters, then try again.
CANCEL
You tried to enter too many numbers for a broadcast. You can enter up to 200 autodialer
number and up to 30 numbers entered through the numeric keys.
Press to delete the extra numbers.
CANCEL
& P
ROBLEM SOLVING
Description / Solution
to cancel a print job. Then set the correct size
STOP
. to select your desired paper.
on the bypass tray.