Using The Energy Save Mode - Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 User Manual

Using the Energy save mode

In order to conserve energy, your machine is initially set to be in the Energy save mode
automatically when the machine is idle for a certain period.
MFX-1330 model automatically enters the Energy save mode in approx. 15 minutes idle
time, and F-300 model does in approx. 5 minutes.
In Energy save mode, the machine stops pre-heating for printing and displays "Energy
Save Mode" on the LCD. However, the LED lamps in the control panel and scanner
lamp will not be off even when the machine is in the Energy save mode.
To recover from Energy save mode, press any key in the control panel.
When your machine receives a fax message during energy save mode, the machine will
wake up automatically.
To change the Energy save mode setting:
1
Press
MENU
Energy Save Mode:On
2
Press
3
Press
ENTER
4
Press
RESET
NOTE: The setting specifying the time until the machine enters Energy save mode can
be changed. Refer to "Idle time setting for switching to the Energy save mode" of
"Entering Initial settings" on page 1.14.
NOTE: If you assign
Energy save mode immediately by pressing the soft key, regardless of the on/off setting
and time setting. For details of the soft key, see page 8.2.
, 2, 1, 0, 5, .
ENTER
 /  /Enter
or to select on or off.
to save the setting.
to exit and return to the standby mode.
" "
Energy Saving to the soft key, you can switch your machine to the
L & I
AYOUT NSTALLATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
1.17