Security Reception - Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 User Manual

Security reception

Security reception tells your machine to keep all received faxes in memory (but not print
them). Then you can print them out later at your convenience. For example, you could
use this if you are concerned about workers reading documents intended for your eyes
only.
NOTE: For this feature to work, you must have activated the passcode protection as
described on left column. You must also know the passcode.
Activating security reception
1
Press
MENU
Security Rx
Enter Passcode :****
2
Use the numeric keys to enter the protection passcode.
3
Press
ENTER
Security Rx
4
Press
5
Press
ENTER
Security Rx
Enter Time:
6
Use the numeric keys to enter the time (use a 24-hour format) for the machine enter
the security reception mode in every day.
To change a digit, press
Then enter the correct digit.
7
Press
ENTER
Turning the security reception on immediately
The machine will enter the security reception mode automatically at the time you have set.
However, if you want to put the machine in the security reception mode immediately, you
can do this by the following procedure:
NOTE: To enable the following procedure, the security reception feature must be set to
active. (See "Activating security reception" above.)
To turn the security reception immediately:
1
Press
ADVANCED FUNCTIONS
– or –
Press the soft key in which "Security" is assigned.
Security
Enter Passcode :****
2
Enter the four-digit passcode.
If you are using the soft key, skip to step 5 after you entered the passcode.
, 2, 2, 1, 1, .
ENTER
.
:Off

/  /Enter
or to select "On".
. The machine shows the machine's current clock setting:
15:42
to move to the left, or
.
repeatedly until "Security" appears, then press
to move right.
ENTER
S
ECURITY FEATURES
1
2
3
4
5
6
7
8
9
12
13
14
A
.
9.3