Sending A Fax Using A Department Code; Making A Copy Using A Department Code - Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 User Manual

Sending a fax using a department code

For this operation to work, make sure:
• The department code should exist on your machine
• You should know the department code
1
Place your document on the ADF or the document glass.
(See page 2.11 for details.)
2
Adjust document resolution and contrast, if necessary.
3
Enter the fax number by either pressing a one-touch key, entering a speed-dial num-
ber or dialing from the numeric keys.
4
Press
START
Enter Dept.Code
_
6
Use the numeric keys to enter the appropriate department code.
7
Press
START
NOTE: The document glass is available only for MFX-1330 model.

Making a copy using a department code

For this operation to work, make sure:
• The department code should exist on your machine
• You should know the department code
1
Place your document on the ADF or the document glass and set any settings you want.
2
Use the numeric keys to enter the number of copies.
4
Press
START
Enter Dept.Code
_
6
Use the numeric keys to enter the appropriate department code.
7
Press
START
NOTE: The document glass is available only for MFX-1330 model.
. (If you pressed a one-touch key, no need to press
.
.
.
.)
START
S
ECURITY FEATURES
1
2
3
4
5
6
7
8
9
12
13
14
A
9.11