Fax Settings; Accessing The Fax Setting - Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 User Manual

Fax settings

The fax settings allows you to customize various setting of fax setting to match your needs.

Accessing the fax setting

1
Press
[Program]

2 Fax Settings

2
Press
[Program]
01 Scan Parameters
3
Use
4
Change setting and press
table:
5
When you have finished, press
The underlined settings are the factory defaults.
01 Scan Parameters
02 Print Parameters Rx Reduc. Rate (Refer the page 5.6.)
10.4 M
ACHINE SETTINGS
, 2, 2.
MENU
No.22_
.
ENTER
No.2201
or to search the item you want to set or change and press
ENTER
Resolution You can choose one of the following.
Normal Scan at 8 dots/mm × 3.85 lines/mm.
Fine
S-Fine
Gray
Contrast You can choose one of the following.
Normal, Dark, Darkest, Light or Lightest.
S-Fine Resol. You can choose one of the following.
400dpi, 600dpi
Auto
100%
Margin Set the reduction margin for Auto reduction. (00 to 85 mm)
40 mm
Half Page Recpt.*
OFF
ON
* When the optional duplex unit is installed in MFX-1330 model, the
following menu is displayd.
Paper Save
OFF
H.Page Rx Combines two of half-page receptions onto a
Duplex Rx Combines and prints the received two one-sided
. For details of each settings, refer to the following
to return to the standby mode.
RESET
Scan at 8 dots/mm × 7.7 lines/mm.
Scan at 8 dots/mm × 15.4 lines/mm.
Scan at 8 dots/mm × 7.7 lines/mm.
Automatically reduces printouts at vari-
able rates down to a minimum of 50%. Tries
to reduce printout to fit on one sheet of your
selected paper size. If it can't, print the received
document at 100% size on two or more pages.
Does not reduce the received documents.
Not combine the half-page receptions.
Combines two of half-page receptions onto a
single sheet.
Not perform either half-page receptions or
duplex receptions.
single sheet.
pages onto both sides of a single sheet.
.
ENTER