Using Alternative Telephone Network Service Providers - Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 User Manual

Using alternative telephone network service providers

When you make a call, you may want to use alternative telephone network service pro-
vider to take advantage of low rates. You can store the access codes in "Dial Prefix" key.
The following information describes how to program the access number.
1
Press
MENU
Dial Prefix No
_
2
Enter the telephone network access number using the numeric keys.
You can enter access numbers up to 40 digits.
If you must wait for another dial tone at the dialing, enter a pause there in the num-
ber by pressing
press
ENTER
"Special dialing characters," page 3.2.)
3
Press
ENTER
4
Press
RESET
NOTE: "Pause /Dial Opt." is assigned to a soft key in F-300 model in the default setting.
Sending faxes with Dial prefix feature
To dial using the numeric keys
1
Place the document on the ADF or document glass.
2
Press
ADVANCED FUNCTIONS
to enter an "/N" in the LCD.
ENTER
– or –
If you assigned "Dial Prefix" to the soft key (page 8.2), simply press that key.
This symbol indicate the access to the alternative telephone network.
Press Start
/N_
3
Enter the fax number using the numeric keys.
4
Press
START
NOTE: • You must enter the full National Code telephone number when dialing telephone
numbers via any network.
• You can assign the "Dial prefix" to a soft key (page 8.2) to enter an "/N", but it can-
not be combined with any one-touch key or speed-dial number for dialing. In order
to send faxes using the one-touch key or speed-dial number, you must instruct
your machine to access the alternative telephone network when you store the fax
number into your autodialer.
To enter the access number into your autodialer:
Before entering a fax number, press
Prefix(/N)" appears then press
number.
• The document glass is available only for MFX-1330 model.
, 2, 2, 1, 6, .
ENTER
repeatedly until "Pause /Dial Opt." appears and
ADVANCED FUNCTIONS
or press the soft key to which "Pause /Dial Opt." is assigned. (Refer to
to save it.
to exit and return to standby mode.
repeatedly until "Dial Prefix(/N)" appears then press
.
ENTER
repeatedly until "Dial
ADVANCED FUNCTIONS
to enter an "/N". And then, enter the fax
S
ENDING FAXES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
4.21