Initial Setup; Clearing Stored Settings; Getting Started - Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 User Manual

Initial Setup

Clearing stored settings

Before using your machine, clear the built-in user data memory. This ensures the
memory will hold only your settings.
IMPORTANT: After you set the initial settings, do not clear the memory again without an autho-
rized technician's advice.
To clear the memory:
1
Press
MENU
Clear User Settings
Yes  Enter
2
If you do want to clear the memory, press
If you do not want to clear the memory, just press

Getting started

In some countries you are required by law to indicate your name and fax number on
every fax you send.
YOU MUST THEREFORE STORE YOUR NAME (OR COMPANY NAME) AND
FAX NUMBER IN YOUR MACHINE BEFORE USING IT.
Every fax page you send arrives at the receiving machine with a single line of text at
the very top of the page. This text lists a name, called the Transmit Terminal Identifier
(TTI), and a fax number.
In "Entering initial settings" below, you can stored the following items includes your
name and fax number registration.
• Language on the LCD and lists
• Current date and time
• Automatically daylight saving time
• Fax reception mode
• Dial tone detection
• Phone dialing type
• Your fax number
• TTI 1 / TTI 2 / TTI 3
• Usual TTI
• Idle time for switching to the Energy save mode
These settings you make here can always be changed later.
, , 0, 2.
Clear User Settings
No  Cancel
.
ENTER
.
CANCEL
L & I
AYOUT NSTALLATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
1.13