Saving The System Configuration - Enterasys Vertical Horizon VH-2402S2 Configuration Manual

Saving the System Configuration

Use the Configuration Save & Restore menu to save the switch
configuration settings to a file on a TFTP server. The file can be later
downloaded to the switch to restore the switch's settings. The success of
the operation depends on the accessibility of the TFTP server and the
quality of the network connection. Parameters shown on this screen are
indicated in the following figure and table.
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
Configuration Upload
Upload Server IP
Upload Filename
[Process TFTP
Upload]
Upload Status
Configuration Download
Download Server IP IP address of a TFTP server.
Download Filename The name of the file that contains the switch configuration
[Process TFTP
Download]
Download Status
9033820-03
Vertical Horizon Stack Local Management
Configuration Upload
Upload Server IP
Upload Filename
[Process TFTP Upload]
Upload status
Configuration Download
Download Server IP
Download Filename
[Process TFTP Download]
Download status : Complete
<APPLY>
Figure 2-18. Configuration Save & Restore
Description
IP address of a TFTP server.
The name of the file to contain the switch configuration settings.
Issues a request to upload the configuration settings to the
specified file on the TFTP server.
Indicates if an upload is "Complete" or "In Progress."
settings you wish to restore.
Issues a request to the TFTP server to download the specified
file.
Indicates if a download is "Complete" or "In Progress."
:
:
: Complete
:
:
<OK> <CANCEL>
VH-2402S2 User Interface 27