Changing the Firewall Settings Before Installing Your Printer
If the installation of printer software is blocked by the Windows firewall, change the firewall settings
before installation.
NOTE:
•
For Windows XP, Service Pack 2 or 3 must be installed.
The following procedure uses Windows 7 as an example.
1
Insert the Software Pack CD-ROM into your computer.
2
Click start
Control Panel.
→
3
Click System and Security.
4
Click Windows Firewall.
5
Click Allow a program or feature through Windows Firewall.
6
Click Change settings.
7
Click Allow another program.
8
Click Browse.
9
Click D:\setup.exe (where D is the drive letter of the optical drive) in the File name text box, and
then click Open.
10
Click Add.
11
Click OK.
81
Printer Connection and Software Installation