Sharpness - Fuji Xerox DocuPrint M218 fw User Manual

 Sharpness
You can adjust the sharpness to make the copy sharper or softer than the original.
1
Load the document(s) face up with top edge in first into the ADF or place a single document face
down on the document glass, and close the document cover.
See also:
• "Making Copies From the ADF" on page 202
• "Making Copies From the Document Glass" on page 200
2
Press the Copy button.
3
Select Sharpness, and then press the
4
Select the desired setting, and then press the
NOTE:
• Value marked by an asterisk (*) is the factory default menu settings.
Sharpest
Sharper
Normal*
Softer
Softest
5
If necessary, customize the copy settings including the number of copies, copy size, and image
quality.
See also:
• "Setting Copy Options" on page 203
6
Press the (Start) button to begin copying.
213 Copying
button.
button.
Makes the copy sharper than the original.
Does not make the copy sharper or softer than the original.
Makes the copy softer than the original.