Bead-Carry-Out (Bco) - Fuji Xerox DocuPrint M218 fw User Manual

 Bead-Carry-Out (BCO)
Problem
Bead-Carry-Out (BCO) is
happening.
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorized dealer.
403 Troubleshooting
Action
If the printer is installed in a high altitude location, set the altitude of
the location.
1 Launch the Printer Setting Utility, and click Adjust Altitude on the
Printer Maintenance tab.
2 Select the value close to the altitude of the location where the
printer is installed.
3 Click the Apply New Settings button.