Copy Quality Problems - Fuji Xerox DocuPrint M218 fw User Manual

Copy Quality Problems

Problem
There are lines or streaks in
copies made from the ADF.
There are spots in copies taken
from the document glass.
The reverse side of the original is
showing on the copy.
Light colors are washed out or
white on the copy.
Image is too light or dark.
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorized dealer.
409 Troubleshooting
Action
There is debris on the ADF glass. When scanning, the paper from the
ADF passes over the debris creating lines or streaks.
Clean the ADF glass with a lint free cloth.
See also:
• "Cleaning the Scanner" on page 435
There is debris on the document glass. When scanning, the debris
creates a spot on the image.
Clean the document glass with a lint free cloth.
See also:
• "Cleaning the Scanner" on page 435
On the Copy menu, enable Auto Exposure.
For information on turning Auto Exposure on and off, see
Exposure" on page 214.
On the Copy menu, disable Auto Exposure.
For information on turning Auto Exposure on and off, see
Exposure" on page 214.
Use the Lighten/Darken option on the Copy menu.
For information on making the image lighter or darker, see
"Lighten/Darken" on page 212.
"Auto
"Auto