Lighten/Darken - Fuji Xerox DocuPrint M218 fw User Manual

 Lighten/Darken
You can adjust the copy density level to make the copy lighter or darker than the original.
1
Load the document(s) face up with top edge in first into the ADF or place a single document face
down on the document glass, and close the document cover.
See also:
• "Making Copies From the ADF" on page 202
• "Making Copies From the Document Glass" on page 200
2
Press the Copy button.
3
Select Lighten/Darken, and then press the
4
Select the desired setting, and then press the
NOTE:
• Value marked by an asterisk (*) is the factory default menu settings.
Lighten2
Lighten1
Normal*
Darken1
Darken2
5
If necessary, customize the copy settings including the number of copies, copy size, and image
quality.
See also:
• "Setting Copy Options" on page 203
6
Press the (Start) button to begin copying.
button.
button.
Makes the copy lighter than the original. Works well with dark print.
Works well with standard type or printed documents.
Makes the copy darker than the original. Works well with light print or
faint pencil markings.
Copying 212