Enabling The Panel Lock - Fuji Xerox DocuPrint M218 fw User Manual

 Enabling the Panel Lock
1
Press the System button.
2
Select Admin Menu, and then press the
3
Select Secure Settings, and then press the
4
Select Panel Lock, and then press the
5
Select Panel Lock Set, and then press the
6
Select Enable, and then press the
7
As necessary, select Change Password, and change the password using the numeric keypad.
Then, press the
NOTE:
• The factory-default panel password is 0000.
NOTE:
• Be sure to remember the password. The procedure described below allows you to reset the password.
However, the settings for the Address Book are cleared.
1 Turn off the printer. Then, while holding the System button, turn on the printer.
• If you change the password while Panel Lock Set is Enable, perform steps 1 to 2. Enter the current
password, and then press the
the button. Enter the new password, and then press the
367 Using the Operator Panel Menus and Keypad
button.
button.
button. Perform steps 3 to 4. Select Change Password, and then press
button.
button.
button.
button.
button. This will change the password.