Auto Reset; Clock Settings - Fuji Xerox DocuPrint M218 fw User Manual

• Auto Reset

Purpose:
To automatically reset the settings for copying, scanning, or faxing to the defaults and return to the
standby mode after you do not specify any settings for the specified time.
Values:
45sec*
1min
2min
3min
4min
• Fault Time-Out
Purpose:
To specify the time taken by the printer before it cancels jobs that stop abnormally. The job is
cancelled if it times out.
Values:
Off
On
• Job Time-Out
Purpose:
To specify the amount of time that the printer waits for data to arrive from the computer. The print job is
cancelled if it times out.
Values:
Off
On

• Clock Settings

Purpose:
To set the date and time, and regional time zone of the printer.
Values:
Set Date
Set Time
Date Format
Disables the fault time-out.
60sec* Specifies the time taken by the printer before it cancels for jobs
that stop abnormally.
3-300sec
Disables the job time-out.
60sec* Specifies the amount of time that the printer waits for data to
arrive from the computer.
5-300sec
Specifies the current date.
Specifies the current time.
yy / mm / dd Specifies the date format.
mm / dd / yy
dd / mm / yy*
Using the Operator Panel Menus and Keypad 346