Scanning From the Operator Panel
The following procedure uses Microsoft
NOTE:
•
Ensure that the printer is connected to the computer using the USB cable.
•
You must use Express Scan Manager on your computer to configure the output destination of the scanned
image files.
1
Load the document(s) face up with top edge in first into the ADF or place a single document face
down on the document glass, and close the document cover.
See also:
• "Making Copies From the ADF" on page 202
• "Making Copies From the Document Glass" on page 200
2
Press the Scan button.
3
Select Scan to Computer(USB), and then press the
4
Configure the scanning settings as necessary.
5
Press the
(Start) button.
The scanned image file is generated.
NOTE:
•
If the window to select the program appears on your computer, select Express Scan Manager-Btype,
and then click OK.
•
File type of scanned data varies depending on application on computer.
See also:
• "Express Scan Manager" on page 62
®
®
Windows
7 as an example.
button.
Scanning
224