Output Paper Size - Fuji Xerox DocuPrint M218 fw User Manual

 Output Paper Size
You can specify the output paper size.
1
Load the document(s) face up with top edge in first into the ADF or place a single document face
down on the document glass, and close the document cover.
See also:
• "Making Copies From the ADF" on page 202
• "Making Copies From the Document Glass" on page 200
2
Press the Copy button.
3
Select Output Paper Size, and then press the
4
Select the desired setting, and then press the
NOTE:
• Value marked by an asterisk (*) is the factory default menu settings.
• To change the default setting of Output Paper Size, change the setting of Paper Size under Tray
Settings → MPF.
*
A4 - 210x297
A5 - 148x210
B5 - 182x257
Letter - 8.5x11
7.2x10.5"
US Folio - 8.5x13
Legal - 8.5x14
Statement
#10Env - 4.1x9.5
Monarch Env.
Monarch Env. L
C5 Env - 162x229
DL Env - 110x220
DL Env L - 110x220
148 x 100mm
148 x 200mm
Env Yougata 2
Env Yougata 2L
Env Yougata 3
Env Yougata 3L
Env Yougata 4
Env Yougata 6
Env Younaga 3
Env Nagagata 3
Env Nagagata 4
Env Kakugata 3
button.
button.
Copying 206