Resetting To Factory Defaults - Fuji Xerox DocuPrint M218 fw User Manual

Resetting to Factory Defaults

After executing Initialize NVM and rebooting the printer, the menu parameters or data are reset to
their factory default values.
NOTE:
• The following procedure does not initialize the network settings.
– To initialize the wired network settings, refer to
– To initialize the wireless network settings, refer to
1
Press the System button.
2
Select Admin Menu, and then press the
3
Select Maintenance, and then press the
4
Select Initialize NVM, and then press the
5
Select System Section to initialize the menu parameters, and then press the
Select User Fax Section to initialize the Address Book data for fax, and select User Scan
Section to initialize the Address Book data for e-mail.
6
Select Yes, and then press the
The printer restarts automatically to apply the settings.
371 Using the Operator Panel Menus and Keypad
"Initialize NVM" on page
"Reset Wireless" on page 335
button.
button.
button.
button.
338.
button.