Polaris 2014 RZR XP 1000 Service Manual page 312

5. Carefully install the rollers into the roll cage
assembly while installing the assembly into the
clutch housing.
NOTE: Install roll cage so that the ring gear
grooves line up with the roll cage windows (see
below). Be sure role cage top groove is facing
upward.
6. Install the torsion spring by wrapping each leg of the
spring around the dowel pin on the ring gear.
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.
7. Align spring retainer dowel pin with ring gear dowel
pin and install the retainer on top of the torsion
spring.
8. Check the action of the torsion spring by rotating in
both directions to ensure the spring and retainer are
installed properly.
FINAL DRIVE
7
7.23