Polaris 2014 RZR XP 1000 Service Manual page 171

ELECTRONIC FUEL INJECTION
15. Install the fuel rail mounting screws and torque to
specification.
Fuel Rail Mounting Screws:
44 in-lb (5 Nm)
16. Reinstall the fuel line to the fuel rail.
17. Connect the harness leads to the fuel injectors.
NOTE: Be sure to connect the PTO harness lead
to the PTO injector and the MAG harness lead to
the MAG injector to ensure proper engine
operation.
18. Use a tie strap to retain the harness leads to the fuel
rail.
19. Reconnect the negative battery cable and reinstall
the driver's seat.
20. Turn key on to allow the fuel system to prime and
inspect the fuel rail and injectors for fuel leaks.
4.22
21. Reinstall the intake plenum assembly and fasten the
lower mount to the transmission mount bracket.
• Be sure the lower air box post is placed properly
• Be sure the air box boots fully seat onto the dual
22. Reinstall the breather into the air box and tighten the
hose clamps retaining the air box to the throttle body
assembly.
23. Reinstall the two screws retaining the air box
assembly.
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.
into the rubber grommet.
throttle body before tightening the hose clamps
(Item 16).
Hose Clamps:
35 in-lb (4 Nm)
Intake Plenum Mount Screw:
22 ft-lb (30 Nm)