Polaris 2014 RZR XP 1000 Service Manual page 139

ENGINE
12. Use new camshaft sprocket retaining bolts upon
assembly. Install the top bolt (Item 8) in each
camshaft sprocket (Item 7). Do not torque the bolts
at this time.
NOTE: Use new sprocket retaining bolts upon
assembly.
3.78
13. Verify cam timing is correct. Flywheel TDC mark
should still be aligned (see Step 1) and cam sprocket
markings should line up as shown.
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.