Polaris 2014 RZR XP 1000 Service Manual page 286

CLUTCHING
14. Install the cam (helix) assembly over the shaft. Line 15. Use a T25 Torx driver to install the four helix
up the "X" on the cam, "X" on spider, and "X" on the retaining screws and torque to specification.
stationary sheave or use the marks previously made
before disassembly. NOTE: If the cam assembly
(helix) is difficult to install, be sure the sheaves are
aligned. To align the sheaves place the clutch
assembly on a flat surface with the cam assembly
(helix) side down. Press down on the moveable
sheave belt face with both hands and the helix will
release.
Helix Retaining Screws:
48 in-lb (5 Nm)
6
6.29
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.