Polaris 2014 RZR XP 1000 Service Manual page 127

ENGINE
5. Install oil drain diverter (Item 3) into the upper
crankcase.
6. Apply Polaris PS-4 engine oil to each rod bearing
journal (Item 4) and main bearing journal (Item 5) of
crankshaft.
7. Loop cam chain (Item 6) and oil pump drive chain
(Item 8) over crankshaft sprockets.
8. Apply Polaris PS-4 engine oil to the new crankshaft
oil seal (Item 7) and install the seal on the PTO end
of the crankshaft.
3.66
9. Carefully lower the crankshaft into upper crankcase.
Guide connecting rods onto the rod journals of
crankshaft as necessary.
10. Adjust the PTO crankshaft seal so it rests properly in
the upper crankcase.
11. Clean bolt hole threads in connecting rod to remove
all oil.
12. Install matching rod cap on connecting rod with 5
digit serial number stampings aligned.
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.