Polaris 2014 RZR XP 1000 Service Manual page 177

ELECTRONIC FUEL INJECTION
16. Roughly align orientation mark on fuel pump
between the orientation marks on fuel tank to ensure
float arm does not get bent or snagged.
WARNING
Failure to align the orientation marks may lead to
interferences with the fuel level float arm
and cause incorrect function.
17. While maintaining downward pressure, thread new
PFA nut onto fuel tank and hand tighten. Use care
when starting PFA nut, ensuring threads are properly
aligned. Verify orientation marks are still aligned
between fuel pump and fuel tank.
18. Torque PFA nut to specification using the Fuel Pump
Service Tool (PU-50326) and a calibrated torque
wrench.
Fuel Pump PFA Nut:
70 ft-lbs (95 Nm)
19. Verify alignment of fuel pump and tank orientation
marks.
20. Connect the fuel supply line to the pump (see "Fuel
Lines - Quick Connect Fittings" for specific
installation procedures).
NOTE: Be sure to engage the retainers on each
fuel line until each snaps into place. Pull on fuel
lines lightly to confirm connection.
21. Install the fuel tank vent line onto the tank fitting.
22. Connect the fuel pump electrical harness.
4.28
23. Test the fuel pump by turning on the key and
listening for the pump to activate. Cycle the key
several times to prime the system.
24. Install the passenger seat / storage box.
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.