Polaris 2014 RZR XP 1000 Service Manual page 232

NOTE: Be sure upper steering shaft hardware is
positioned correctly (see "Exploded View').
1. Install the upper steering shaft and align the skip-
tooth spline (Item 1) on the power steering stub shaft
with the opening (Item 2) in the upper steering shaft.
2. Install the pivot tube and torque fasteners to
specification.
Pivot Tube Fasteners:
8 ft-lb (11 Nm)
3. Install the tilt shock and torque fastener to
specification.
Tilt Shock Fastener:
7 ft-lb (10 Nm)
4. Be sure the front wheels are pointing straight ahead
and install the steering wheel and retaining nut.
Torque the nut to specification and reinstall the
plastic wheel cover.
Steering Wheel Nut:
65 ft-lbs (88 Nm)
BODY / STEERING / SUSPENSION
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.
5. Install a new upper steering shaft pinch bolt and nut.
Torque pinch bolt to specification.
Upper Steering Shaft Pinch Bolt:
15 ft-lbs (20 Nm)
6. Reconnect both electrical harnesses onto the power
steering unit. Be sure the connectors snap into
place.
7. Reinstall the black plastic cover over the power
steering unit and install the two Torx-head fasteners.
8. Turn the key switch on and test EPS operation.
5
5.35