Camshaft/Cylinder Head Cover Installation - Honda XL200 2001 Shop Manual

XL2 0 0
Clean the cylinder head gasket surface of any gasket materials.
NOTE
• Do not allow dust and dirt to enter the engine.
Install the dowel pins, new O-ring and new cylinder head gasket.
Install the cylinder head
Install a new sealing washer and the tensioner pivot bolt through
the tensioner hole.
Tighten the bolt to the specified torque.
TORQUE: 10 N.m (1.0 kg.m, 7 ft-lb)
CAMSHAFT/CYLINDER HEAD COVER
INSTALLATION
CYLINDER HEAD COVER ASSEMBLY
Apply oil to the rocker arm shafts.
Install the rocker arms and rocker arm shafts in the cylinder head
cover.
With the rocker arm shaft reliefs on the inside, install the rocker
arm shaft plate.
Tighten the setting screw securely.

CAMSHAFT/CYLINDER HEAD COVER INSTALLATION

Install the dowel pins and rubber plug.
CYLINDER HEAD/VALVES
DOWEL PIN
CYLINDER HEAD
SOCKET BOLT/WASHER
ROCKER ARM
SCREW
RUBBER PLUG
DOWEL PINS
GASKET
ROCKER ARM SHAFT
PLATE
6 -1 5