Sharp MX-M200D Service Manual page 77

Main Sub
code code
65 10 Key reception time setting display/non-display setting
Used to set Enable/Disable of the key reception time setting in the system settings. When this setting is set
to Enable (1), the key reception time is displayed in the system settings, allowing setting.
Sim65-10 KEY TIME
1:KEY ACK TIME
[ 0- 1]
[CA] key: Exit the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
11 Info lamp setting
Used to set the Info lamp brightness (PWM duty) and the kind of flashing.
Sim65-11 INFO LAMP
1:PWM DUTY
2:BLINK TYPE
[ 1- 5]
During this simulation, Info lamp is lighted to allow checking of the brightness.
[CA] key: Exit the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
67 50 USB reception speed adjustment
Used to set an limitation on the print data reception speed when the USB transfer speed is at full speed.
Sim67-50 USB SPEED
1:FULL SPEED
[ 1- 4]
* When images are disturbed in printing through USB, change the setting and try again.
[CA] key: Exits from the simulation mode.
[INTERRUPT] key: Shifts to the sub code entry window.
Contents
Display: Setting
0: Disable
1
1: Enable
1
Lamp brightness
1: 100%
1
2: 80%
1
3: 60%
4: 40%
1
5: 20%
Kind of flashing
1: Flashing
2: Flashing 10 times, and lighting thereafter.
3: Lighting
Display : Setting
1 : FAST
Fast
2
2 : NORMAL 1
3 : NORMAL 2
Slow 4 : SAFE
2
MX-M200D SIMULATIONS 7-48
Remark
Default:
1
Default:
Lamp brightness: 1
Kind of flashing: 1
Default:
3