Sharp MX-M200D Service Manual page 71

Main Sub
code code
50 10 When [OK] key is pressed, the entered value is saved to the EEPROM and the machine shifts to the copy
execution window.
After completion of copying, the machine returns to the adjustment value input window.
When [START] key is pressed instead of [OK] key, the machine shifts to the copy execution window and
performs copying.
(Copy start window)
Ready to copy.
S
100%
8 1/2 11
(Copy execution window)
Copies in progress.
S
100%
8 1/2 11
12 Document off-center adjustment
Used to adjust the scanning start position in the main scanning direction of the document.
When this simulation is executed, the selection window of the adjustment items and the current set value
are displayed.
(Adjustment item selection window)
Sim50-12 ORG. CENTER
1:OC
2:SPF(SIDE1)
3:SPF(SIDE2)
[ 1- 99]
(Note) 2:SPF(SIDE1) is available only for the model with the SPF/RSPF.
(Note) 3:SPF(SIDE2) is available only for the model with RSPF.
The adjustment value is in the range of 1 - 99.
When the adjustment value is increased, the document scanning position is shifted to the right and the
image is shifted to the left as a result.
When the adjustment value is increased by 1, the scanning area is shifted by 0.1mm.
Select an adjustment item (mode) with the arrow keys, and enter the set value with numeric keys.
When [OK] key is pressed, the entered value is saved to the EEPROM and the machine shifts to the copy
execution window.
After completion of copying, the machine returns to the adjustment value input window.
When [START] key is pressed instead of [OK] key, the machine shifts to the copy execution window and
performs copying.
(Copy start window)
Ready to copy.
S
100%
8 1/2 11
(Copy execution window)
Copies in progress.
S
100%
8 1/2 11
Contents
Adjustment
item selection
window
[START] key
End of copy execution
Display text array : Adjustment mode
1: OC : OC document off-center adjustment
50
2: SPF (SIDE1) : SPF/RSPF document (front) off-center adjustment
50
3: SPF (SIDE2) : RSPF document (back) off-center adjustment
50
50
Adjustment
item selection
window
[START] key
End of copy execution
MX-M200D SIMULATIONS 7-42
[BACK] key
Copy start
[OK] key
window
[START] key
Copy execution
window
[BACK] key
Copy start
[OK] key
window
[START] key
Copy execution
window
Remark
Default:
OC: 50
SPF(SIDE1): 50
SPF(SIDE2): 50