Sharp MX-M200D Service Manual page 68

Main Sub
code code
49 01
0xFF No process
0x00 OK
0x01 Download impossible
0x02 Total data size error
0x03 LOADER no file
0x04 DWLD no file
0x05 BOOT no file
0x06 MAIN no file
0x07 FONT download impossible
0x08 Option FLASH connection error
0x09 Option FLASH no match
0x11 LOADER data size error
0x12 LOADER work sum check error
0x21 BOOT data size error
0x22 BOOT work sum check error
0x23 BOOT Flash erase error
0x24 BOOT Flash write error
0x25 BOOT Flash sum check error
0x31 MAIN data size error
0x32 MAIN work sum check error
0x33 MAIN Flash erase error
0x34 MAIN Flash write error
0x35 MAIN Flash sum check error
0x41 FONT data size error
0x42 FONT work sum check error
0x43 FONT Flash erase error
50 01 Image lead edge adjustment
Used to adjust the following items related to the lead edge adjustment.
1.Print start position (Offset between output image and paper
2.Image lead edge void (Margin on the output image lead edge)
3.Document scanning start position (Image scanning start position in the sub scanning direction)
When this simulation is executed, the selection window of the adjustment items and the set value are
displayed.
(Adjustment item selection window)
Sim50-1 LEAD EDGE
1:TRAY1
2:TRAY2
3:MFT
1/2 [ 1- 99]
Display text
1:TRAY1
2:TRAY2 (*)
3:MFT
4:DEN-A
5:RRC-A
6:DEN-B
Note 1: Items marked with (*) are displayed when TRAY2 and following options are not installed.
Note 2: When executing an adjustment copy from the manual paper feed tray, set the following paper.
AB series
Inch series
Note 3: When the adjustment value of the print start position adjustment is increased by 1, the ON timing of
the resist roller is delayed and the print result is shifted to the lead edge by 0.1mm.
Note 4: When the adjustment value of the image scanning start position is increased by 1, the scanning
start position is shifted to the home position by about 0.1mm, increasing the image loss amount.
Note 5: When the print start position (TRAY1) is changed, the print start positions (TRAY2 - TRAY4) and the
print start position (MULTI BYPASS) are also changed accordingly.
Contents
FAX
Sim50-1 LEAD EDGE
4:DEN-A
50
50 5:RRC-A
6:DEN-B
50
50 2/2 [
:Adjustment mode
:Print start position (TRAY1)
:Print start position (TRAY2 - TRAY4)
:Print start position (MULTI BYPASS)
:Image lead edge void amount
:Document scanning start position
:Image rear edge void amount
A3 paper
Double Letter paper
MX-M200D SIMULATIONS 7-39
0x44 FONT Flash write error
0x45 FONT Flash sum check error
0x52 Registration data work sum check error
0x56 Registration data format error
0x57 Registration data items insufficient error
0x58 Registration data items overlap error
0x61 BOOT data size error
0x62 BOOT work sum check error
0x63 BOOT Flash erase error
0x64 BOOT Flash write error
0x65 BOOT Flash sum check error
0x71 MAIN data size error
0x72 MAIN work sum check error
0x73 MAIN Flash erase error
0x74 MAIN Flash write error
0x75 MAIN Flash sum check error
0x81 FONT data size error
0x82 FONT work sum check error
0x83 FONT Flash erase error
0x84 FONT Flash write error
0x85 FONT Flash sum check error
0x91 DWLD data size error
0x92 DWLD work sum check error
0x93 DWLD Flash erase error
0x94 DWLD Flash write error
0x95 DWLD Flash sum check error
Adjusted for each tray.)
50
50
50
1- 99] 50
Remark
Default:
TRAY1: 50
TRAY2: 50
MFT: 50
DEN-A: 50
RRC-A: 50
DEN-B: 50